Description
The WRV210 is a VPN router with a Wireless-G access point for small offices and home offices. The 10/100 Ethernet WAN interface connects directly to your broadband DSL or Cable modem. For the LAN interface, there is a built-in 4-port, full-duplex 10/100 Ethernet switch that can connect up to four devices. The wireless AP supports 802.11b/g and incorporates Linksys RangeBooster technology, which utilizes a MIMO antennae configuration to provide increased coverage and reliability over standard 802.11g.
The WRV210 has the advanced security functions needed for business networking. It has a stateful packet inspection (SPI) based firewall with Dos prevention, but also a Virtual Private Networking (VPN) engine. VPN enables secure communications over the Internet between your office and mobile, remote workers or branch offices.
Manufactured by: LINKSYS
Model/Part : WRV210
Device Type: Wireless router
Form Factor: External
Networking Connectivity Technology: Wireless, wired
Integrated Switch: 4-port switch
Data Link Protocol: Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g
Spread Spectrum Method: OFDM, DSSS
Switching Protocol: Ethernet
Network / Transport Protocol: PPTP, L2TP, IPSec, PPPoE
Routing Protocol: RIP-1, RIP-2, static IP routing
Remote Management Protocol: SNMP 1, SNMP 2c, HTTP, HTTPS
Performance: NAT throughput : 93 Mbps VPN throughput (IPSec) : 23 Mbps
Capacity: IPSec VPN tunnels : 10
Features: Full duplex capability, firewall protection, DMZ port, VPN support, VLAN support, Syslog support, Stateful Packet Inspection (SPI), DoS attack prevention, ALG support, MAC address filtering, Wireless Distribution System (WDS) support, firmware upgradable, MIMO technology, Wi-Fi Multimedia (WMM) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), IPSec NAT-Traversal (NAT-T), RangeBooster technology
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11e
Antenna: External integrated
Antenna Qty: 2
Directivity: Omni-directional
Gain Level: 2 dBi
Interfaces: 1 x network – Ethernet 10Base-T/100Base-TX – RJ-45 ( WAN ) 4 x network – Ethernet 10Base-T/100Base-TX – RJ-45 1 x network – Radio-Ethernet
Encryption Algorithm: Triple DES, MD5, AES, 128-bit WEP, 64-bit WEP, TLS, SHA-1, PEAP, TTLS, TKIP, WPA, WPA2-PSK, WPA2-Enterprise
Authentication Method: RADIUS, Radio Service Set ID (SSID)
Compliant Standards: FCC Class B certified, CE, IC
Power Device: Power adapter – external
Width: 6.7 in
Depth: 7.6 in
Height: 1.7 in
Weight: 12.5 oz
Reviews
There are no reviews yet.