Description
HP ProCurve M110 Access Point is an entry-level, single IEEE 802.11a/b/g radio device that can be configured to operate as an access point, a wireless distribution system (WDS) bridge, or a full-spectrum IEEE 802.11 Wireless LAN (WLAN) monitor. The ProCurve M110 Access Point supports up to two virtual service communities, each with independent VLAN and wireless security profiles. The M110 Access Point can be centrally managed as part of the HP ProCurve intelligent mobility system. It is plenum rated and powered by IEEE 802.3af-compliant Power over Ethernet (PoE). The M110 access point is Wi-Fi certified for WPA2, WPA, and WEP security and has hardware-assisted AES and RC4 encryption.
Manufactured by:HP
Model/Part :J9385A
Device Type: Wireless access point
Form Factor: External
Connectivity Technology: Wireless
Data Transfer Rate: 54 Mbps
Data Link Protocol: IEEE 802.11b, IEEE 802.11a, IEEE 802.11g
Encryption Algorithm: RC4, AES, PEAP, WPA, WPA2
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3af, IEEE 802.1x, IEEE 802.11i
Antenna Qty: 2
Gain Level: 2 dBi
Interfaces: 1 x network – Radio-Ethernet 1 x network – Ethernet 10Base-T/100Base-TX – RJ-45
Compliant Standards: EN55022 Class B, ICES-003 Class B, EN 300.328, EN 301.489.1, EN 301.489.17, FCC Part 15 B, FCC Part 15.247, RSS-210, MIC, UL 2043, UL 60950-1, IEC 60950-1, EN 301.893, FCC Part 15.407, ARIB STD-T66, ARIB STD-T71, RCR STD-33
Localization: United States
Width: 5.5 in
Depth: 5.0 in
Height: 1.3 in
Weight: 2.0 lbs
Reviews
There are no reviews yet.