Description
The 3Com Switch 4210 is a Layer 2 entry-level 10/100 LAN switch with enterprise-class QoS, security and management features, delivering high value for network administrators looking for an economical edge device that provides simple port expansion.
Setting them apart from lower-end “smart managed” devices, the Switch 4210 supports an industry-standard Command Line Interface (CLI), Web-based administration, and SNMP management.
Cluster together up to 32 devices for easy administration, with single IP management across 3Com switching lines – with mixed clusters of Switch 4210, 4200G, 4500G, 5500 and 5500G devices.
This switch has Gigabit uplinks; its combination ports can run in one of two modes: 10/100/1000 Mbps connections over copper Ethernet cabling, or 100 or 1000 Mbps over fiber cabling using SFP mini-GBIC technology.
Manufactured by: 3COM
Model/Part :3CR17333-91
Type: Switch – stackable
Enclosure Type: External – 1U
Localization: United States
Networking Ports Qty: 24 x Ethernet 10Base-T, Ethernet 100Base-TX
Auxiliary Network Ports: 2×10/100/1000Base-T/SFP (mini-GBIC)(uplink)
Max Units In A Stack: 32
Data Transfer Rate: 100 Mbps
Data Link Protocol: Ethernet, Fast Ethernet
Routing Protocol: IGMPv2, IGMP, IGMPv3
Remote Management Protocol: SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP
Connectivity Technology: Wired
Communication Mode: Half-duplex, full-duplex
Switching Protocol: Ethernet
MAC Address Table Size: 8K entries
Status Indicators: Port status, power
Features: Layer 2 switching, auto-sensing per device, auto-negotiation, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, DoS attack prevention, store and forward, Broadcast Storm Control, IPv6 support, Quality of Service (QoS)
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Expansion Slots Total (Free): 2 ( 2 ) x SFP (mini-GBIC)
Interfaces: 2 x network host – Ethernet 10Base-T/100Base-TX/1000Base-T – RJ-45 24 x network node – Ethernet 10Base-T/100Base-TX – RJ-45 1 x management – console – RJ-45
Encryption Algorithm: MD5, TLS, PEAP
Authentication Method: RADIUS, PAP, CHAP, Secure Shell v.2 (SSH2)
Compliant Standards: FCC Class A certified, VCCI Class A ITE, EN55024, EN55022 Class A, FCC Part 15 B, ICES-003 Class A, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1
Power Device: Power supply – internal
Voltage Required: AC 120/230 V ( 50/60 Hz )
Width: 17.3 in
Depth: 6.3 in
Height: 1.8 in
Weight: 4.6 lbs
Reviews
There are no reviews yet.